John's Organ Works

Home
MIDI Keyboard Stacks
Midified Pedalboards
Used Organ Benches
Selling Policy
Place an Order
News
Contact Me
Downloads
Links
The Virtual Pipe Organ Explained
Glossary
John's Blog

Do Not Feed!
Organ Grinder

IDC-48

 IDC-48 

The NEW Single Board IDC-48 Midi Encoder/Decoder-Driver for Draw Knobs and SAM's. The IDC-48 can control up to 48 Stop Actions and sense the Stop Actions switches, sending and received midi data to and from Hauptwerk. The single board configuration eliminates stop action wiring to a separate midi encoder and midi decoder location. Other Features include "Auto Pulse Length" which will supply voltage to the action coils for up to 500ms or as short as needed based on the action switch movement. The Smart Action function will send voltage to a stop if the stop is set to change in the combination action and TEST MODE that steps the actions in sequence make the IDC-48 an ideal choice.

Features of the IDC-48 include DIP Switch setting for MIDI Channel, MIDI Note Range, 150ms or 250ms Magnet ON pulse and “Auto Pulse Length”.  There are no configuration files to create or computer programming of the card required.
 
Features of the IDC-48 include DIP Switch setting for MIDI Channel, MIDI Note Range, 150ms or 250ms Magnet ON pulse and “Auto Pulse Length”.  There are no configuration files to create or computer programming of the card required.  All functions are simple DIP Switch settings.
 
Additional Features
· Small Size,  2.7” x 8.4”
· Input Power Voltage Range, 8 to 18 Volts DC.
· Current requirement, less than 30ma.
· Crystal Controlled Microcontrollers for long term stability.
· “Auto Pulse Length”, variable pulse length controlled by the stop action movement period.
· Smart Control,  only sends voltage to voltage to actions that change state with combination.
· Stop Action Test Mode.  Sequentially steps actions.
· Molex KK-100 series connectors with .1” pin spacing.
· Power, Activity and Auto Pulse Length LED’s
· Available in Two configurations, IDC-48-Coil Positive Voltage Common and Switch Common Ground,
       IDC-48-PC– Coil Positive Voltage Common and Switch Positive Common.

Full instructions available in the Downloads section soon.

£550

Currently in stock: 0

Return to MIDI Encoders and Decoders page

Return to Home page